IC20-32A MIVO 32 loads
A pre-built collection unit for wired M-Bus with room for 32 loads. The same connectivity as the larger model, in a smaller cabinet.
Technical specifications
Type
Collection unit for wired M-Bus
Capacity
MBus 1: up to 32 M-Bus loads
Devices included
- MIVO Connect MC01
- all-pole isolator
Enclosure
IP65 wall-mounted enclosure
Power supply
- 230 V 50 Hz
- fused at no more than 16 A, 6 A recommended
Connectivity
- 4G over mini-SIM (2FF) and an SMA antenna
- WAN and LAN over Ethernet
Router
A Teltonika RUT241 or RUT351 with Propeye Wireguard is required
Other ports
- RS485
- USB-C for the web interface
Terminals
0.2–1.5 mm², stripped 8 mm
Modbus
Local connection, up to 30 m
Network cable
CAT 5 UTP or better
Installation
Carried out by a qualified electrician
Features
32 M-Bus loads
One bus with room for 32 loads covers smaller properties and single stairwells, without paying for capacity you will not use.
A pre-built cabinet
The devices arrive mounted and wired in an IP65 enclosure, ready to go on the wall.
4G or the building network
Data goes out over the mobile network on its own SIM card, or over the building's Ethernet where there is one.
Commissioned on site
The web interface is reached over USB-C and the meters are found with the wizard, so the installation can be verified straight away.
Want to know more about IC20-32A?
Get in touch and we will help you choose the right metering and connectivity for your property.

